Metric screws and inch screws comparison

The metric system is used in Europe, which is why more and more metric screws are being sold. However, buying inch screws is still necessary in certain areas, especially English and American products such as cars, computers and other devices require inch screws.

One inch corresponds to 2.54cm, the sizes are given in fractions when buying inch screws, so a screw with the designation "1/4" is a quarter inch in size. The most commonly used thread types are the UNC, an American standard coarse thread. There is also the UNF thread, an American standard fine thread. Finally, there are English Whitsworth threads such as BSW, BSF and BSP. Many of the inch screws have the same flank angle as metric screws of 60°, but the English threads usually have an angle of 55°, and the diameters of the inch screws are also not compatible with those of metric screws.

Follow the tips below to find the best price when buying inch screws. First of all, you should make sure that you choose the right type of screw, because as mentioned above, metric screws and inch screws are not compatible. So you cannot interchange the two types of screw. Then make sure that you choose the correct thread variant and the correct dimensions of the screws. You should proceed in detail here, especially because of the large number of different threads and problems with converting millimeters to inches.

Do you have any questions about this? Please contact us: Ask a question

Buy metric screws and inch screws

Buy top inch screws: your first choice for precision

Inch screws are screws that are measured in inches and are essential in many international projects. Learn more about the different types and applications of inch screws.

Inch screws - the most important things at a glance

    • Inch screws are standardized according to the Anglo-American measurement system and differ from metric screws in thread types and materials.

    • Choosing the appropriate thread type (such as UNC or UNF) and material (e.g. stainless steel, galvanized steel) is crucial for the stability and strength of the connection.

    • Selecting the right inch screws requires a detailed analysis of the project requirements, including size, diameter and application, to achieve optimal results.

What are inch screws?

Inch screws are a specific type of screw whose dimensions are measured in inches. These screws are particularly widespread in the USA and are standardized according to the Anglo-American measurement system. Unlike metric screws, which are measured in millimeters, inch screws are based on the inch system, making them essential in many international applications.

The main difference between inch screws and metric screws is the unit of measurement and the type of thread. While metric screws have standardized threads with a uniform pitch and a flank angle of 60°, the variation in thread types for inch screws varies. These differences in threads have a direct impact on their uses and dimensions.

Choosing the right thread type is crucial to the success of a project. Whether you require a coarse or fine thread pitch, inch screws offer a variety of options to suit the specific needs of your application. This makes inch screws a preferred choice for many professional applications.

What are metric screws?

Metric screws, as the name suggests, are measured in millimeters and feature a consistent pitch that gives them high precision. These M10 screws are standardized according to the ISO metric thread, which is recognized worldwide and has a uniform pitch and a flank angle of 60°. In addition, M12 screws are also available.

This standardization allows metric screws to be used in a wide range of applications as they offer high compatibility and interchangeability. Metric screws are typically known as machine screws and are commonly used in metalworking and mechanical engineering.

The clear and precise dimensions of metric screws make them a preferred choice for projects that require the utmost accuracy. Their uniform pitch and standardized dimensions ensure that they can be used reliably in many different applications.

Thread types of inch screws

Inch screws are standardized in the USA and are measured in inches rather than metric units. There are different thread types that vary depending on the application. The most common include UNC (Unified National Coarse) and UNF (Unified National Fine).

UNC threads have a coarser pitch and are ideal for applications that require less precision but more strength. They are ideal for connections that require frequent assembly and disassembly. UNF threads, on the other hand, have a finer pitch and are used for more precise applications where high accuracy, strong holding force and fine threads are required.

The number of threads per inch (TPI) and the specifically named diameter (see tips and FAQs)

 are crucial for selecting the right screw. These factors determine the resilience and stability of the connection and are therefore of great importance for the success of your project.

Materials and finishes

Inch screws are available in a variety of materials that can be selected depending on the application and environmental conditions. Here are some common materials:

    • Stainless steel as it offers corrosion resistance and strength

    • Galvanized steel which provides additional protection against rust

    • Brass, which is known for its good electrical conductivity

    • Plastic that is lightweight and corrosion resistant

This makes stainless steel ideal for applications in humid environments where rust could be a problem.

In addition to stainless steel, steel and brass are also used. Steel is known for its high strength and is often used in robust structures. Brass offers good corrosion resistance and is often used in specific applications that require less stress.

Choosing the right material depends on the specific needs of your project. Each material has its own advantages and limitations that should be considered when choosing screws to achieve optimal results.

How do I find the right inch screws?

Selecting the correct inch screws is critical to the success of any project. There are many factors to consider when choosing, such as the size, diameter and material of the screws. These factors determine the stability and security of the application and should therefore be selected carefully.

Inch screws are used in various industries, including mechanical engineering, automotive and electronics. The specific requirements of each category influence the choice of screws, which is why a detailed analysis of the requirements is necessary before selection.

In addition, the materials play an important role. Whether steel, stainless steel or brass, the choice of material depends on the operating conditions. An overview of the standardized sizes and diameters can help you choose the right inch screw.

Sizes and diameters

Inch screws are available in various sizes and diameters, typically ranging from 1/4 inch to 1 inch. This variety makes it possible to find the right screws for a variety of applications. A table of the most common sizes can help you get a quick overview.

Choosing the right size is crucial for the stability and security of the connection. Accurate measurement of the diameter and length of the screw is necessary to ensure proper fit.

The dimensions of the screws determine their load capacity and their ability to perform the intended tasks. Therefore, it is important to know the exact requirements of your project and select the appropriate screws.

Application and areas of application

Inch screws find application in various industries including automotive, mechanical engineering and electronics of American descent. In the automotive industry, for example, they are used to fasten body parts. In mechanical engineering, they are used to connect large machine components.

In electronics, inch screws ensure secure and stable connections, which are crucial for the functionality of the devices. The specific requirements of each industry influence the choice of screws and make it necessary to select the correct screw types and sizes.

Buying advice

When purchasing inch screws, it is important to choose the correct sizes and types. Online orders offer the advantage that you can choose from a large selection of screws. Expert advice from Screwsandmore.de can help you make the best decisions.

Careful selection and advice are crucial to finding the right screws for your project. Take advantage of the advantages of online shopping and get advice if necessary to achieve optimal results.

Buy inch screws at Screwsandmore.de

Screwsandmore.de offers a wide selection of inch screws, all of which are immediately available from stock and can be delivered within 1-3 working days.

This guarantees fast and reliable delivery, which is of great importance for time-critical projects.

Shipping costs within Germany are €2.99; shipping is free for orders over €50. International shipping costs vary depending on the region, so that customers outside of Germany can also benefit from the high-quality products.

Screwsandmore.de is a member of the Stainless Steel Trademark Association, which ensures the high quality of the products offered. Order your inch screws conveniently online and benefit from fast delivery and the large selection of high-quality screws.

Summary

Choosing the right inch screws is critical to the success of any project. Inch screws offer a variety of options in thread types, materials and standards ensuring they meet the specific needs of your application. Understanding these differences and carefully selecting the right screw are crucial to achieving optimal results.

From the definition and properties of inch screws to the different materials and thread types to the relevant DIN and ISO standards, we have highlighted the most important aspects. With the right purchasing advice and choosing a reliable provider like Screwsandmore.de, you are well prepared to successfully implement your projects.

Use the knowledge gained to select the best inch screws for your needs and to realize your designs with the highest precision and reliability.

Frequently asked questions

What are inch screws?

Inch screws are screws that are measured in inches and are primarily used in the USA. They differ from metric screws in their measurement systems and thread types.

What is the difference between UNC and UNF threads?

The difference between UNC and UNF threads lies in their thread pitch; UNC threads are coarse and suitable for less precise applications, while UNF threads are finer and better suited for more precise applications.

What materials are used for inch screws?

Inch screws are primarily made from stainless steel, steel and brass, with each material offering specific advantages. This selection allows adaptation to different requirements and applications.

Why are ANSI standards important for inch screws?

ANSI standards are crucial for inch screws as they guarantee compliance with quality and safety standards, which in turn increase international compatibility and usability. This promotes smooth international trade and safe use of products.

Where can I buy high-quality inch screws online?

You can purchase high-quality inch screws online at Screwsandmore.de, where you are offered a wide selection and fast delivery.